• Easy to use, no maintenance
• For ultra-low volume samples
• Carbon nanotube technology

• Modular design to save money
• Easy to use, no maintenance
• Carbon nanotube technology

• Easy to replace
• Lasts for 12 months

• No activation is necessary
• Can be used up to 80°C
• Works without inner electrolyte
• Length of electrode shaft can be customized

• Electrode: platinum plate 6.5 x 6.5 mm square by 0.25 mm thick
• Body material: glass
• Overall length: 90mm
• Gold tip length: 10mm
• Gold tip diameter: 2 mm pin
• Glass body outer diameter: 6mm
• Glass body length: 75mm

ET031-2 Pair of 85 mm Square Glass Plates

• Improve or smooth peaks
• Increase I values to expected levels
• Correct expectected E values
• Reduce oscillations or noise 

ET034 0.3 µm Alumina Slurry

ET033 0.05 µm Alumina Slurry

• USB connectivity
• virtual serial port technology
• binary events converted to human readable plain text

• Can be used with tiny sample volumes of 500 nanoliter (nL)
• pH range: 2-12

ET042 pH Electrode

• Integrated C4D electrodes on the chip
• Made from durable, chemically inert, non-porous glass
• Long channel for improved peak separation

• Eight-channel C4D headstage
• Measure conductivity in pipette tips, melting point tubes, NMR tubes or capillaries

• Ready operation in an automated system
• Low volume, low waste, no cross contamination
• 100 µS/cm to 10 mS/cm conductivity range*
• Pipette tips, melting point tubes, NMR tubes or capillaries

• Multichannel Configurable Chemistry Workstation
• One to eight input channels
• Use with either third-party or eDAQ software
• Measure pH, temperature or other detector signals

• Contactless conductivity detector for third-party instruments
• Flexible configuration for CE, HPLC, FIA
• Analog input channel for second detector
• RS232 serial port
• Low cost, small size

• For electrophoresis and chromatography techniques
• Works with both eDAQ and third-party software
• Wide settings range for optimum conductivity detection

• For electrophoresis and chromatography techniques
• Includes software for data collection and analysis
• Second input channel for recording from other detectors
• Digital outputs to control external devices

• General purpose conductivity monitor
• Measures a wide range of conductivities

• Conductivity detector for IC, HPLC and FIA
• Conductivity range: 150 µS/cm to 15 mS/cm
• Excellent peak resolution

• Conductivity detector for IC, HPLC and FIA
• Conductivity range: 150 µS/cm to 15 mS/cm
• Excellent peak resolution

• C4D detector for microfluidic chips
• Use with glass or polymer microfluidic chips

• Made from chemically resistant Zeonor
• Double-T junction
• With luer interfaces

• Based on Capacitively-Coupled Contactless Conductivity Detection (C4D) technology.
• Designed for using NORELL™ Standard Series™ NMR Tubes, 5 mm OD, 1.8-2.2 mL.
• Designed for small conductivity change detection with high resolution.
• Automated monitoring growth of uniformly and non-uniformly dispersed microorganisms in simple substrates (e.g. liquid culture media) and complex substrates (e.g. blood, yogurt, minced meat, sewage, and sludge) with real-time display of growth kinetics curves.

• Zero consumables: The entire analysis process does not require microbial separation or purification, nor any physical, chemical, or biological additives or consumables.
• A simple and user-friendly operating system that completes the entire analysis process automatically, with easy operation, good versatility, low application cost, and high accuracy.

• Integrated C4D electrodes on the chip
• Made from durable, chemically inert, non-porous glass
• Short channel for fast analysis (< 1 minute)

• Compatible with chips with integrated C4D electrodes
• Supplied with cables (high voltage and C4D)
• Design allows for use of optical and fluorescence detectors

• Multichannel Configurable Chemistry Workstation
• One to eight input channels
• Use with either third-party or eDAQ software
• Measure pH, temperature or other detector signals

• Ready operation in an automated system
• Low volume, low waste, no cross contamination
• 100 µS/cm to 10 mS/cm conductivity range*
• Pipette tips, melting point tubes, NMR tubes or capillaries

• Contactless conductivity detector for third-party instruments
• Flexible configuration for CE, HPLC, FIA
• Analog input channel for second detector
• RS232 serial port
• Low cost, small size

• For electrophoresis and chromatography techniques
• Works with both eDAQ and third-party software
• Wide settings range for optimum conductivity detection

• For electrophoresis and chromatography techniques
• Includes software for data collection and analysis
• Second input channel for recording from other detectors
• Digital outputs to control external devices

• Based on Capacitively-Coupled Contactless Conductivity Detection (C4D) technology.
• Designed for using NORELL™ Standard Series™ NMR Tubes, 5 mm OD, 1.8-2.2 mL.
• Designed for small conductivity change detection with high resolution.
• Automated monitoring growth of uniformly and non-uniformly dispersed microorganisms in simple substrates (e.g. liquid culture media) and complex substrates (e.g. blood, yogurt, minced meat, sewage, and sludge) with real-time display of growth kinetics curves.

• Zero consumables: The entire analysis process does not require microbial separation or purification, nor any physical, chemical, or biological additives or consumables.
• A simple and user-friendly operating system that completes the entire analysis process automatically, with easy operation, good versatility, low application cost, and high accuracy.

• Solar Cells
• Supercapacitors
• Fuel Cells
• Batteries
• Sensors
• General Electrochemistry

• Batteries / Supercapacitors
• Fuel Cells
• Corrosion
• Sensors
• Solar Cells
• General EIS experiments

• USB connectivity
• virtual serial port technology
• binary events converted to human readable plain text

• Use with up to 4 electrodes or voltage inputs
• Electrically isolated
• USB connection to computer
• Use with Pod-Vu or LabVIEW software

• Use with up to 4 electrodes or voltage inputs
• Electrically isolated
• USB connection to computer
• Use with Pod-Vu or LabVIEW software

• Collect, display and analyse chromatography data
• Integrate peaks automatically or manually
• Upgrade your GC, HPLC, IC or FIA
• Support for one or two detectors with 24 bit resolution
• Control fraction collectors and auto-injectors
• Customizable report
• Copy/paste compatibility with most software

• Collect, display and analyse chromatography data
• Upgrade your GC, HPLC or IC
• Two channels with up to 24 bit resolution
• Control autosamplers and fraction collectors

• Collect, display and analyse chromatography data
• Upgrade your GC, HPLC, IC or FIA
• Supprt for one detector with 24 bit resolution

• Collect, display and analyse chromatography data
• Integrate peaks automatically or manually
• Upgrade your GC, HPLC, IC or FIA
• Support for one or two detectors with 24 bit resolution
• Control fraction collectors and auto-injectors
• Customizable report
• Copy/paste compatibility with most software

• Collect, display and analyse chromatography data
• Upgrade your GC, HPLC or IC
• Two channels with up to 24 bit resolution
• Control autosamplers and fraction collectors

• Up to ±3000 V at 150 μA
• Switching times better than +/- 0.002 s accuracy
• Four high voltage outputs which monitor current and voltage
• Programmable logic outputs for control of external devices
• Utilizes sequencer software or operate via serial communication

• Collect, display and analyse chromatography data
• Upgrade your GC, HPLC, IC or FIA
• Supprt for one detector with 24 bit resolution

• Up to ±3000 V at 150 μA
• Switching times better than +/- 0.002 s accuracy
• Four high voltage outputs which monitor current and voltage
• Programmable logic outputs for control of external devices
• Utilizes sequencer software or operate via serial communication

• Complete system for microchip electrophoresis
• Floating, gated or pinched injections

1. Preview of signals from the isoPods™
2. Selectable gain ranges (sensitivity)
3. Units conversions
4. Signal Zeroing
5. Setting data recording speeds
6. Sensor/Electrode Calibration
7. Start and Stop of recording
8. Y-Axis Scaling
9. Copy and Paste of signals or data
10. Fixed duration recording
11. Signal Zoom

• Easy to replace
• Lasts for 12 months

• No activation is necessary
• Can be used up to 80°C
• Works without inner electrolyte
• Length of electrode shaft can be customized

• Electrode: platinum plate 6.5 x 6.5 mm square by 0.25 mm thick
• Body material: glass
• Overall length: 90mm
• Gold tip length: 10mm
• Gold tip diameter: 2 mm pin
• Glass body outer diameter: 6mm
• Glass body length: 75mm

ET031-2 Pair of 85 mm Square Glass Plates

• Improve or smooth peaks
• Increase I values to expected levels
• Correct expectected E values
• Reduce oscillations or noise 

ET034 0.3 µm Alumina Slurry

ET033 0.05 µm Alumina Slurry